Return to the BUILD
“Now you will attach the Front Chassis to the Rear Chassis of your model NISSAN GT-R (R35).”
The Front Chassis
Retrieve the Rear Chassis assembly from the previous pack. Place the four posts at the front edge of the Rear Chassis over the matching holes at the rear of the Front Chassis, as shown:
While holding the two halves in place, secure the parts together with four (4) AM screws.
This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:
My chassis parts were a little bent, so I needed to really press these together to get the screws to bite. Also, make sure these seams are aligned:
While this completes the pack, Eaglemoss recommends storing the chassis upside down to reduce stress on the joint:
Another pack with only one thing to do, but look at this thing! It really gives us a sense of how big this model will be. Since both halves of the chassis are metal, the weight is really adding up.
Running Total of screws used so far: 212
Pack 33 – Frame: Front/Rear Chassis Parts