Return to the BUILD
“Now you will add the Front and Rear Chassis Parts to your model NISSAN GT-R (R35).”
The Front and Rear Chassis Parts
Retrieve the Chassis assembly from the previous pack. Fit the Front Chassis Part over the matching cutout of the Front Chassis:
Unfortunately, this part did not fit at all:
Turns out something was a little bent, so I needed to file down this tab:
Secure these together with four (4) AM screws.
This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:
Place the Rear Chassis Part over the matching cutout of the Rear Chassis…
… and secure it down with four (4) GM screws:
At least this pack had two things to build (compared to the previous packs). Both parts are metal, so the chassis continues to get heavier.
Pack 34 – Frame: Fuel Tank, Suspension Boards