Return to the BUILD
“Next, you will assemble the Left Door Panel of your NISSAN GT-R (R35) model.”
Contents
Parts
Build
The Left Door Panel
Step 01
Push the two pins of the Left Door Panel Outlet into the matching holes at this location on the top of the Left Door Panel, as shown.
This is a press-fit and does not require any screws:
Step 02
Push the two pins of the Left Electric Window Switch into the matching holes at this location on Left Door Panel Handle, as shown.
This is also a press-fit and does not require any screws:
Step 03
Fit the two posts of this Left Door Panel Handle assembly into the matching holes at this location on the Left Door Panel, as shown:
Step 04
Secure the Left Door Panel Handle into place from the inside of the Left Door Panel with two (2) GP screws:
Step 05
Remove the strips on the back of the Left Door Storage Panel and stick it into this matching location on the Left Door Panel, as shown:
Thoughts
All of the little details on this door are quite good. The small white/red reflector on the Left Door Panel was already pre-installed.
Next Up
Pack 86 – Body: Left Window/String, Gears, Left Door Speaker