PACK 97

 Return to the BUILD


“Let’s add the parts your received with this [issue] to the Rear Bumper of your NISSAN GT-R (R35).”

 

Contents


Parts

Build


The Rear Bumper

Step 01

Retrieve your Rear Bumper from the previous pack. Fit the Left Turn Signal to this location on the Rear Bumper as shown, and secure it into place with one (1) GM screw.

This is your friendly reminder to try using 3-in-One Oil on all screws going into metal:

Step 02

Fit the Right Turn Signal to this opposite location on the Rear Bumper as shown, and secure it into place with one (1) GM screw:

Step 03

Fit the License Plate Light into this slot of the Rear Bumper as shown, and secure it into place with two (2) GM screws:

Step 04

Fit the keyed post of the Rear GT-R Badge into this matching keyed hole of the Rear Bumper, as shown:

Step 05

Secure the Rear GT-R Badge to the Rear Bumper from the inside with one (1) BP screw:

Thoughts


We only added a few small details to our Rear Bumper this time, but in the next pack we will install the iconic rear tail lights!

Next Up


Pack 98 – Body: Rear Light Bases/Lenses, Front Support Blocks

Leave a Reply

Your email address will not be published.